Sun Clear 473ml Reviews

Anti condensation spray stops the formation of condensation on the inner surface of a polytunnel cover which can be harmful to plants, annoying to personnel, & can reduce light transmission by as much as 50%. SunClear condensation spray is a non-toxic coating that reduces the effects of condensation. A misting Sprayer or roller can apply it to any type of polythene cover, even with existing crops growing. When Sun Clear is applied, light transmission will be significantly improved. Condensation will run down the inside of the Polythene cover. A single application can last 2-5 years. Polythene can be manufactured that offers condensation control (Anti-Fog). What is commonly not known, is that this treatment does not last beyond ONE year - The additive ultimately gets washed away and the polythene cover will eventually be depleted of the condensation controlling, additive. A bottle of 473ml has an indefinite shelf life and will provide coverage of approximately 5,000 sq.ft - enough to cover a First Tunnels ‘20ft x 72ft’ polytunnel twice times over. Shop our anti condensation spray for a clear polytunnel that is protected! A water based solution, developed to stop greenhouse dripping in flexible, rigid plastic or glass greenhouses, tunnels and other plastic structures. Properties Color    White Specific gravity   1.14 Viscosity   50cc Sun Clear 19.3 seconds pH    4.9 – 5 Odor    Odorless Operating temperature  Above Freezing Mix ratio   100:1 plastic  /  50:1 glass Flash Point    None Storage Life    Indefinitely (store in above freezing conditions) Hazardous Air Pollutants  None Environmentally safe   Contains no solvents Basic Uses • Stop condensate drip. • Improve plant quality and yield due to less Botrytis and other plant diseases • Increase light transmission by as much as 50% through plastic or glass. • Non-toxic and will not harm plants or animals. • Works on any nonporous surface, such as aluminum, plastic, steel, glass or painted surfaces. • Reduces static charge in plastic • Quick and easy to apply. Limitations Will not work on porous surfaces, such as wood, concrete, etc. Will not adhere to surfaces with oil residue or other contaminates. Installation To apply, spray Sun Clear mixture forcefully on surface. Work from bottom upward until entire surface is thoroughly wetted and all drops disappear. If any spots are missed, they may be re-treated at any time. Surface Preparation and Use Any foreign particles or residual chemicals on surface should be removed for best performance. Mixing Instructions Mix Sun Clear with clean water. The water should have a normal pH of 7-7.2 for best results. Temperature Sun Clear should be applied in above freezing conditions or icing may occur. Once Sun Clear is applied and allowed to dry, temperature is no longer a factor. Coverage 568ml (1 Pint) will cover approx. 5,000 sq. ft. Storage Sun Clear can be stored indefinitely as long as it is not allowed to freeze. Maintenance Sun Clear is Non-hazardous, Non-toxic. In case of spills or leaks, contain spill, collect with absorbent material and transfer to suitable container. Dispose of in accordance with current, applicable local, state, or federal regulations. Removal Use white vinegar with a dilution ratio of 10-1. 10 parts water to 1 part vinegar. Algon also removes Sun Clear.