Geeetech Reviews 67

I bought a Geeetech Mizar M 3D printer a little over a year ago. The printer is very good.

I want to replace the print bed and contacted Geeetech customer service.

Their website doesn't have many spare parts left for 3D printers.

The only response I received was to find a replacement bed myself from another supplier.
I don't think it's right that a year after buying the 3D printer, the parts to replace the print bed are no longer available.
Your customer service is really unacceptable.

Be very careful with this company geetech I got a 1kg roll of abs+ and was happy printing when I noticed no filament was come out my filament detection unit hadn't stopped the machine on close investigation the feed tube to the extruder was stuck could not remove the filament whe i managed to pull the filament out i discovered this sticky substance on the filament which was all over the spool consequently it block all the feed from my humidity box to the extruder and also rendering the extruder as dead cannot clear it out , I contacted geetech and all I got was a reply to say they would replace the roll but it was out of stock at the moment ha , but I still have a damaged machine with no compensation forthcoming so be very careful people don't not buy geetech filament use other suppliers i use sunglasses now much better and less clogging good luck

my a30t has been a really good printer so far (18 months in) print quality is good but to be fair it isnt for the novice user.
yes you do need to have filament loaded into all 3 extruders when printing things to avoid the hot end from blocking up but once it has been set up correctly it gives some really nice prints.
bad point is the extruders are rubbish, you are better off swapping them for all metal dual drive extruders but will need to reverse the motors. also the filament run out sensors are rubbish but you can turn them off in the printer settings and not use them. would i recommend these printers? yes but not for beginners as it is a steep (vertical) learning curve.
great machine for a great price

I purchased the printer and it duly arrived, i have not managed to actually print anything at all with it, the filament blows a big bubble in the ptfe tube and that in turn stops or twists the filament inside to stop the print, although the printer functions it does so without filament in it. So far i have spent more money on new ptfe tubes, and also a new hotend. all to no avail. I have 4 other printers that have worked since day one, this printer has not worked at all, the support service is absolute rubbish, if you value your sanity do not use this companies printers.I would have given 0 stars but the minimum is 1 star, they do not deserve to even get this. Today i will start a chargeback for my money

I'm happy with the performance of my Geeetech printer, and their filament products. But buying directly from their website (which may be necessary, if you need spare parts) is a slow service. They've taken over 2 weeks to just ship the items. And I paid extra for faster delivery too. So it looks like it will be at least 3 weeks after making the purchase, the parts will arrive.

My 3D printer is currently out of action until the parts arrive. In retrospect, I wish I bought a printer where I could obtain spares more quickly. Btw, their customer support is pretty useless, I contacted them more than once trying to get information on tracking, and when it will be shipped. They replied quickly but took no responsibility or provided any information, just saying it's either shipped, and a tracking number will come in the next 2-3 days, or that it's handled by their warehouse, and provided no further details. Eventually an automated email arrived with the tracking info.

My advice; before buying a 3D printer, do some research on where you can obtain spare parts more locally. I doubt I've ever buy a Geeetech printer in the future to avoid this hassle.

Terrible customer service.
Ordered a resin printer with 4 bottles of resin. Only one bottle of resin came, plus wrong power lead. Had to jump through lots of hoops with customer service, and finally stopped answering me, after opening 4 cases with them.
Avoid if you want good support.

I am new to 3d printing and love my Misar S and Mizar M geeetech printers. The customer service I have received from Geeetech is amazing and I always get a quick response to all of my questions. They are there to help every step of the way.

When I think of 3D printing, the name Geeetech comes to mind. I have been buying products for several years, I have tried all the types of filament that they put on the market and they have all gone well for me and I have been able to give a positive review.
I still have to try their printers, and their resin.
It is a serial company with good customer service.
Currently the word Geeetech is synonymous with quality.

Top seller and reliability of Fast shipping Machine received very quickly and very well packaged place for assembly and testing assembly asser simple

1 of the first filament companies I think about when I want to order more as they have a great selection of different materials and one of the best colour choices and some that really pop and that has now made it onto my selling page.
They always come quickly and have great packaging.
The spools are perfectly sealed and beautiful winding on the spool, no tangles or anything.
Great price too.
Been using them on my old Enders with no problems and now use them on my Bambu and work perfectly with no problems with some fantastic results.
The service side if I hardly have to use them is fantastic and responds very quickly and promptly and knows the solution very quickly or even hints and tips.
Will be using these again and again!

The mizar S is a must to have in anyone's printer collection, and their filaments are good quality!

Not just awesome service with their great products, but customer service goes above and beyond to make sure that their products meet the customer's need. Overall a great company with great products.

This filament ranks among the better ones I've used as far as printing. The prints come out a bit shiny (which is good).
What I bought was: Geeetech PETG Filament 1.75mm, Stronger Toughness Printing Consumables, Diameter Tolerance +/- 0.03 mm, 1 KG (2.2 LBS) Spool Fit Most FDM 3D Printer, Transparent

I recently tested the Matte Blue PLA and I liked it so much I picked up 2 additional rolls. Planning to use it for the rails on my game table.

Tried the Black PLA and is really good! Prints like a charm using 200/60 temperature. No stringing and good adhesion. Will buy more for sure!

I have several GT printers. These printers are work horses. Definitely not plug and play. And like everything else require maintenance to keep them running perfectly. The models I have are, A10T, A20, A10M, A30T, Alkaid Resin printer, and A30 which I converted to an engraver/cut printer.

I have come across that brand probably a year and a half ago and I am pretty happy with their filaments . Filament is awesome and prints perfect with no artifacts and its as good as other high-end brands. Also the spool is well wound and never been tangled.
They make frequent giveaways which is awesome!

Also the customer service is pretty good always helped me when needed - just a little 5 hour time difference with my country but if they do not answer the same day they definitely do it on the next day!

To wrap it up I am very happy with the brand!

I just finish my first 1L Bottle of Standard Grey Resin from Geeetech.
Really good finish with high détails no fail.
I printed some Bust over 18cm height and support remove without lot of mark.

Good day
Frenchy3D 😁

I’ve been using some of the Geeetech filament and have some amazing results. Printed beautifully with no additional calibration. Couldn’t be happier. The rainbow silk pla was gorgeous. I can’t wait to get my hands on one of their printers.

I've had a mostly positive experience with Geeetech. I've purchased several items from them, including the Thunder and Mizar M 3D printers, which have provided reliable, high-quality prints and proven to be user-friendly.

I did run into a minor electronic issue at one point, but Geeetech's customer service was quick to respond and offered a satisfying solution. Their prompt and professional assistance further increased my trust in the brand.

While my experiences have been generally good, I believe no one is perfect. So, I am deducting a star due to the minor hiccup I faced. Regardless, I look forward to seeing what Geeetech brings to the table in the future.